Professional Drywall Over Masonry Installation in Burnaby, BC

Over Masonry Drywall Installation Services in Burnaby

Installing drywall over masonry surfaces requires specialized techniques for proper adhesion and moisture control. Professional drywall solutions address the unique challenges of concrete and brick substrates through careful surface preparation and furring systems.

Drywall Over Brick Walls

Installing gypsum board over brick walls requires proper preparation to ensure lasting results. You must clean the brick surface thoroughly, removing any loose mortar, dirt, or efflorescence that could prevent proper adhesion.

Surface Preparation Steps:

• Remove loose debris and dust
• Apply masonry primer or bonding agent
• Fill large gaps with appropriate filler
• Install vapor barrier if needed

Your drywall installation will benefit from using construction adhesive specifically designed for masonry surfaces. Apply the adhesive in a zigzag pattern across the back of each gypsum board panel.

Moisture-resistant drywall works best for brick applications since masonry can retain moisture. You should allow adequate drying time between primer application and drywall installation.

Professional drywall services often recommend leaving small gaps at floor and ceiling joints. These expansion spaces prevent cracking as the building settles.

Drywall Over Concrete Surfaces

Concrete surfaces present unique challenges for drywall solutions due to their hardness and potential moisture issues. You need specialized fasteners and techniques to achieve proper attachment.

Required Materials:

• Concrete screws or masonry anchors
• Moisture barrier film
• Construction adhesive rated for concrete
• Impact drill with masonry bits

Your ceiling drywall installation over concrete requires extra support due to gravity loads. Space fasteners closer together than standard wood framing installations.

Check concrete surfaces for moisture problems before beginning work. You should test for water infiltration and address any leaks before installing drywall services.

Apply construction adhesive in continuous beads rather than dots for better contact with the concrete surface. This method distributes weight more evenly across the panel.

Essential Steps of Drywall Furring Installation

Furring strips create an air gap between masonry and gypsum board, improving insulation and moisture control. You install these wooden or metal strips perpendicular to the final drywall orientation.

Installation Process:

• Mark furring strip locations every 16 or 24 inches
• Drill pilot holes into masonry surface
• Attach strips with appropriate concrete anchors
• Check for plumb and level alignment
• Install insulation between strips if desired

Your drywall installation becomes much easier with properly installed furring systems. The strips provide consistent nailing surfaces and eliminate irregular masonry surfaces.

Metal furring offers superior moisture resistance compared to wood strips. You should consider this option for basement applications or areas with high humidity.



Proper spacing ensures adequate support for ceiling drywall and prevents sagging. Check local building codes for specific requirements in your area.

Professional Drywall Application and Finishing Techniques

Professional drywall installation over masonry surfaces requires specialized techniques for hanging, taping, mudding, and sanding to achieve smooth, durable wall finishes. These methods ensure proper adhesion and long-lasting results when installing drywall over brick, concrete, or other masonry materials.

Precision Drywall Hanging

Your drywall installation begins with precise measurements and proper fastening techniques. You must locate wall studs accurately and mark their positions before hanging any panels.

Standard hanging procedures include:

• Installing furring strips over masonry surfaces for proper attachment
• Cutting drywall panels to exact dimensions with minimal waste
• Maintaining 1/4-inch gaps at floor joints for expansion
• Using appropriate screws every 12 inches along studs

You should hang full sheets first, then measure and cut smaller pieces for remaining areas. Start installation from the top of the wall and work downward.

Proper screw depth matters significantly. Your screws must penetrate the paper surface slightly without breaking through completely.

Expert Taping and Mudding

You apply joint compound in three distinct coats to achieve professional results. The first coat embeds the tape, while subsequent coats feather and smooth the joints.

Your initial taping coat should completely cover the tape without excess buildup. Apply joint compound with a 6-inch knife, pressing firmly to eliminate air bubbles.

Second and third coat applications:

• Use progressively wider knives (8-inch, then 10-12-inch)
• Feather edges 8-12 inches beyond previous coat
• Allow 24 hours drying time between coats
• Apply thin, even layers without ridges

You must also address screw holes and corner beads during this process. Inside corners require folded tape, while outside corners use metal or plastic corner beads.

Detailed Sanding and Refinishing

Your sanding process removes imperfections and creates smooth surfaces ready for painting or texturing. You begin with 120-grit sandpaper for initial smoothing, then progress to 150-grit for final finishing.

Essential sanding techniques:

• Use circular motions to avoid creating grooves
• Sand only when joint compound is completely dry
• Wear dust masks and ensure proper ventilation
• Check surfaces with bright lighting to identify imperfections

You may need to apply additional joint compound to low spots or imperfections discovered during sanding. Light sanding between coats prevents buildup and maintains smooth transitions.

Your final inspection should reveal no visible joints, screw holes, or surface irregularities when viewed under bright light.

Moisture-Resistant and Insulated Drywall Options

You should install moisture-resistant drywall in areas prone to humidity, especially over masonry walls that may experience condensation. These specialized panels contain additives that resist mold and moisture damage.

Moisture-resistant installation considerations:

• Green board for moderate moisture areas
• Purple board for high-humidity locations
• Proper vapor barriers behind drywall panels
• Sealed joints to prevent moisture infiltration

Your drywall insulation options include rigid foam boards or batt insulation installed between furring strips. This combination improves thermal performance and reduces condensation risks.



You must ensure proper air circulation behind insulated drywall installations. Leave gaps at top and bottom plates to allow airflow and prevent moisture accumulation between the masonry wall and new drywall surface.

Drywall Repair, Replacement, and Surface Preparation

Professional drywall repair services address damage from minor holes to extensive water damage, while complete replacement ensures structural integrity for severely compromised walls. Proper surface preparation creates the foundation for flawless finishes and long-lasting results.

Comprehensive Drywall Repair Services

Minor damage requires immediate attention to prevent spreading and maintain your wall's integrity. Metrotown Drywall Burnaby handles everything from small nail holes to larger punctures caused by furniture or accidents.

Common repair types include:

• Small holes (nail holes, screws)
• Medium holes (doorknob damage)
• Large holes (furniture impacts)
• Cracks from settling
• Water damage spots

The repair process begins with damage assessment and surrounding area preparation. Small holes receive compound application and sanding, while larger damage needs mesh patches or backing material for structural support.

Water damage requires moisture testing before repairs begin. Affected drywall must be completely dry to prevent mold growth and ensure proper adhesion of repair materials.

Professional drywall repair services include texture matching to blend repairs seamlessly with existing walls. Your repaired areas will be indistinguishable from the original surface once complete.

Efficient Drywall Replacement

Extensive damage often requires complete panel replacement rather than patching. This approach provides better long-term results and maintains structural integrity throughout your interior walls.

Replacement indicators include:

• Multiple holes in one area
• Extensive water damage
• Structural cracks
• Outdated drywall types
• Renovation requirements

The replacement process involves careful removal of damaged sections without disturbing surrounding areas. New drywall panels are cut to exact specifications and secured with appropriate fasteners.

Moisture-resistant drywall is recommended for areas prone to humidity, such as basements or rooms adjacent to bathrooms. This specialized material prevents future moisture-related problems.

Proper replacement includes insulation checks and electrical consideration before new panels are installed. Your contractor ensures all building codes are met during the replacement process.

Surface Preparation for Interior Walls

Surface preparation determines the quality and longevity of your finished walls. Proper preparation involves cleaning, priming, and smoothing all surfaces before final finishing begins.

Preparation steps include:

• Dust and debris removal
• Surface cleaning
• Primer application
• Imperfection correction
• Texture preparation

Drywall sanding creates smooth surfaces by removing excess compound and eliminating imperfections. Fine-grit sandpaper prevents damage while achieving professional-grade smoothness.

Drywall refinishing requires multiple compound coats with sanding between applications. Each layer builds upon the previous one to create perfectly smooth surfaces ready for paint or texture.



Prime surfaces receive better paint adhesion and more uniform color coverage. Proper priming also seals the drywall compound and prevents moisture absorption that could cause future problems.

Choosing Metrotown Drywall Burnaby for Your Project

Metrotown Drywall Burnaby delivers professional drywall installation, repair, and finishing services with comprehensive insurance coverage and expertise in both residential and commercial projects. Their specialized services include popcorn ceiling removal and complete interior wall upgrades for masonry surfaces.

Trusted Drywall Contractors in Burnaby

Metrotown Drywall Burnaby has established itself as a reliable choice among drywall contractors in Burnaby BC. You can contact them at (604)-330-8736 for your over masonry drywall installation needs.

The company specializes in drywall over brick and drywall over concrete applications. These projects require specific expertise in furring installation and moisture management that standard drywall work doesn't address.

Their experience includes:

• Drywall furring installation over masonry surfaces
• Moisture-resistant drywall selection and installation
• Professional drywall hanging techniques for uneven surfaces
• Complete drywall taping and mudding services

You receive comprehensive project support from initial assessment through final finishing. The team handles drywall surface preparation, installation, and refinishing to ensure your masonry walls are properly covered.

Liability Insurance and Professional Standards

Professional drywall contractors carry liability insurance to protect your property during installation. This coverage is essential when working with over masonry drywall installation projects that involve structural modifications.

Insurance protection includes:

• Property damage coverage during installation
• Worker injury protection on your site
• Equipment and material liability
• Project completion guarantees

You should verify insurance credentials before starting any drywall renovation project. Licensed contractors maintain current coverage and provide documentation upon request.

Professional standards ensure proper drywall insulation installation behind new walls. This prevents moisture issues common in masonry-to-drywall conversions and maintains building code compliance.

The installation process follows industry best practices for drywall sanding and finishing. Quality control measures prevent callbacks and ensure long-term wall performance.

Commercial and Residential Drywall Solutions

Commercial drywall projects require different approaches than residential installations. Your business needs may include fire-rated materials, accessibility compliance, and accelerated timelines.

Commercial services include:

• Office interior wall installation
• Retail space drywall upgrades
• Warehouse partition installation
• Restaurant and hospitality renovations

Residential projects focus on comfort and aesthetics. You receive personalized service for basement wall drywall installation, room additions, and whole-house renovations.

The company handles both drywall repair and drywall replacement projects. Small damage repairs cost less than full replacement, while extensive water damage may require complete wall reconstruction.

Project scheduling accommodates your business operations or family routine. Commercial work often occurs during off-hours to minimize disruption.

Popcorn Ceiling Removal and Interior Upgrades

Popcorn ceiling removal creates a modern appearance and eliminates dust-collecting textured surfaces. This service often accompanies over masonry drywall installation in older buildings.

The removal process involves:

1. Testing for asbestos in pre-1980 installations
2. Scraping textured material from ceiling surfaces
3. Refinishing with smooth drywall compound
4. Painting preparation and priming

You can combine ceiling updates with wall improvements for complete room transformations. Moisture-resistant drywall works well in kitchens and bathrooms where humidity affects both walls and ceilings.

Interior upgrades improve property value and living comfort. Professional drywall finishing creates smooth surfaces ready for paint or wallpaper application.



The combination of wall and ceiling work reduces overall project costs. Single-contractor coordination simplifies scheduling and ensures consistent quality across all surfaces.