Professional Drywall Hanging & Installation Services in Burnaby, BC

Comprehensive Drywall Hanging and Installation Services

Professional drywall installation requires precise techniques for walls and ceilings, specialized methods for interior spaces, and tailored approaches for both residential and commercial properties. Modern installation practices ensure structural integrity while meeting specific building requirements.

Drywall Wall Installation Techniques

Your wall installation begins with accurate measurements and material selection based on your specific requirements. Standard 1/2-inch drywall works for most interior walls, while 5/8-inch provides enhanced durability for high-traffic areas.

Professional contractors use proper fastening patterns with screws placed every 12 inches on center along studs. Vertical installation typically works best for standard 8-foot ceilings, reducing the number of seams.

Key installation steps include:

• Marking stud locations accurately
• Cutting precise openings for outlets and switches
• Maintaining 1/4-inch gap from floor for expansion
• Ensuring tight joints between panels

Moisture-resistant drywall becomes essential in bathrooms and laundry areas. Fire-rated options meet building code requirements for attached garages and furnace rooms.

Drywall Ceiling Installation Process

Ceiling installation presents unique challenges requiring specialized techniques and equipment. You need proper support systems to handle the weight and prevent sagging over time.

Installation requires specific considerations:

• Perpendicular orientation to ceiling joists
• Additional blocking for heavy fixtures
• Proper ventilation clearances
• Coordinated electrical and HVAC integration

Professional installers use mechanical lifts for safe positioning and consistent results. Screws must penetrate joists by at least 1 inch for adequate holding power.

Textured ceiling applications require smooth, even surfaces before finishing. Your contractor ensures proper joint alignment to minimize visible seams in the completed installation.

Interior Drywall Installation for Homes and Businesses

Interior drywall installation varies significantly between residential and commercial applications. Your project requirements determine material specifications and installation methods.

Residential applications focus on:

• Comfort and aesthetics
• Sound control between rooms
• Easy maintenance and repair
• Cost-effective solutions

Commercial installations emphasize:

• Fire safety compliance
• Durability under heavy use
• Accessibility requirements
• Professional appearance standards

Room-specific considerations affect material choices. Kitchens benefit from moisture-resistant panels, while media rooms may require sound-dampening options.

Professional surface preparation ensures optimal paint and texture adhesion. Your finished walls provide smooth, uniform surfaces ready for final decorating.

Residential and Commercial Drywall Installation Solutions

Residential drywall solutions prioritize comfort, energy efficiency, and aesthetic appeal for your living spaces. Installation techniques accommodate standard framing with focus on seamless transitions between rooms.

Residential features include:

• Standard thickness options
• Decorative corner treatments
• Integration with insulation systems
• Flexible scheduling around occupancy

Commercial installations demand enhanced performance specifications. Your business requires durable surfaces that withstand daily wear while meeting safety codes.

Commercial requirements involve:

• Higher impact resistance
• Fire-rated assemblies
• ADA compliance considerations
• Minimal maintenance needs

Project coordination becomes critical for commercial work. Professional contractors schedule installation around business operations to minimize disruptions while ensuring quality results.



Both applications benefit from proper framing preparation and systematic installation approaches that deliver lasting performance.

Expertise in Drywall Finishing and Surface Preparation

Professional drywall finishing transforms rough drywall panels into smooth, paint-ready surfaces through precise taping, mudding, sanding, and surface preparation techniques. These critical steps determine the final appearance and durability of your interior walls and ceilings.

Drywall Taping and Mudding Procedures

Drywall taping begins with applying joint compound along seams where panels meet. You need paper or mesh tape embedded into the first coat of mud to reinforce these joints.

The three-coat system provides optimal results. The first coat covers the tape and fills the joint. The second coat feathers wider to blend edges smoothly.

Key taping materials include:

• Paper tape for flat joints
• Mesh tape for inside corners
• Metal corner beads for outside edges
• Joint compound in appropriate consistency

Your third coat creates the final smooth finish before sanding. Each layer must dry completely before applying the next. Professional contractors ensure proper drying time and consistent thickness across all applications.

Professional Drywall Sanding Methods

Drywall sanding removes imperfections and creates uniform surfaces for painting or texturing. You should use progressively finer grits starting with 120-grit sandpaper for initial smoothing.

Proper dust control protects your health and keeps work areas clean. Professional sanders use vacuum-equipped tools that capture dust at the source. This prevents particles from settling on other surfaces.

Effective sanding requires:

• Adequate lighting to spot imperfections
• Dust masks and eye protection
• Vacuum sanders or dust collection systems
• Fine-grit paper for final smoothing

Hand sanding works best for detail areas and corners. Power sanders handle large flat surfaces efficiently. You must avoid over-sanding which can damage the paper surface or create gouges.

Drywall Finishing for Smooth Surfaces

Smooth drywall finishing eliminates visible seams and creates flawless walls ready for paint application. This process requires multiple thin coats rather than single thick applications.

Level 5 finishing provides the smoothest possible surface. This involves applying a thin skim coat of joint compound over the entire wall surface. The technique works especially well under critical lighting conditions.

Professional drywall finishing services use specialized tools for consistent results. Wide knives and trowels create smooth, even applications. Proper lighting during application reveals any imperfections immediately.

Your final surface should show no tape lines, tool marks, or texture variations. Quality finishing eliminates the need for primer in many cases and ensures uniform paint coverage.

Drywall Surface Preparation Best Practices

Surface preparation begins with inspecting all joints and fastener locations for proper coverage. You must fill any gaps or depressions before proceeding with finishing coats.

Preparation checklist includes:

• Checking all screw heads are properly countersunk
• Verifying corner beads are securely fastened
• Filling gaps larger than 1/8 inch with compound
• Priming any exposed paper surfaces

Temperature and humidity control affects compound drying and adhesion. Maintain temperatures between 55-70°F with moderate humidity levels. Poor environmental conditions can cause cracking or poor adhesion.



Clean surfaces before applying finish coats. Dust and debris prevent proper bonding and create surface defects. Your preparation work directly impacts the quality and longevity of the finished installation.

Drywall Repair, Replacement, and Specialized Solutions

Metrotown Drywall Burnaby handles comprehensive repair and replacement services for damaged drywall systems. Our specialized solutions include moisture-resistant materials, fire-rated installations, and professional patching techniques for both residential and commercial properties.

Drywall Replacement Services

When your drywall suffers extensive damage from water, fire, or structural issues, complete replacement becomes necessary. We remove damaged sections and install new drywall panels that match your existing wall specifications.

Our replacement process includes:

• Damage assessment and measurement
• Safe removal of compromised materials
• New panel installation with proper fastening
• Seamless integration with existing surfaces

Large holes, extensive water damage, and structural modifications often require full panel replacement rather than patching. We handle single-panel replacements for small areas or complete room renovations for major projects.

Replacement timeframes:

• Single panel: 1-2 hours
• Multiple panels: Half to full day
• Whole room: 1-2 days

Drywall Patching and Crack Repair

Small holes, dents, and cracks develop from normal wear, moving furniture, or settling foundations. Professional drywall repair addresses these issues before they expand into larger problems.

We repair various damage types including nail holes, screw pops, hairline cracks, and medium-sized holes up to 6 inches. Our patching techniques use mesh patches, backing boards, or plug methods depending on hole size.

Common repair scenarios:

• Picture hanging holes
• Door handle damage
• Furniture impact dents
• Settlement cracks
• Plumbing access holes

The repair process involves cleaning the damaged area, applying appropriate backing material, filling with joint compound, and sanding smooth. Multiple coats ensure proper adhesion and seamless blending with surrounding surfaces.

Moisture-Resistant and Fire-Rated Drywall Options

Specialized drywall products provide enhanced protection in specific environments. Moisture-resistant drywall prevents mold growth in bathrooms, kitchens, and basements where humidity levels remain elevated.

Moisture-resistant features:

• Water-repellent core materials
• Treated paper facings
• Enhanced mold resistance
• Suitable for high-humidity areas

Fire-rated drywall offers increased fire resistance for commercial buildings, multi-family housing, and garage installations. These panels contain additives that slow fire spread and maintain structural integrity during emergencies.

Type X fire-rated drywall provides one-hour fire resistance when properly installed. Commercial applications often require these materials to meet building code requirements for safety and insurance compliance.

Professional Drywall Repair for Homes and Businesses

Metrotown Drywall Burnaby serves both residential and commercial clients with tailored repair solutions. Home repairs focus on aesthetics and living comfort, while business repairs prioritize minimal disruption and code compliance.

Residential services include:

• Interior wall repairs
• Ceiling damage restoration
• Texture matching
• Paint preparation

Commercial projects require coordination with facility managers and adherence to business schedules. We work during off-hours when possible to minimize operational impact on your business activities.

Our team identifies underlying damage causes such as plumbing leaks or structural movement. This comprehensive approach prevents recurring problems and ensures long-lasting repairs that protect your investment.

Contact Metrotown Drywall Burnaby at (604)-330-8736 for professional repair assessments and quality restoration services throughout the Burnaby area.

Structural Framing and Renovation Expertise

Metrotown Drywall Burnaby provides comprehensive structural framing services that form the foundation for quality drywall installation. Our expertise covers new construction framing, renovation projects, and specialized commercial applications throughout Burnaby, BC.

Drywall Framing for New Spaces

Metal stud framing offers superior durability and precision for your drywall installation projects. You benefit from lightweight steel construction that resists warping, shrinking, and settling common with wood framing.

Standard framing specifications include:

• 20-gauge steel studs for load-bearing walls
• 25-gauge studs for non-load-bearing partitions
• 16" or 24" on-center spacing depending on application

Fire-rated assemblies require specific framing configurations to meet building codes. Your commercial projects often need 1-hour or 2-hour fire ratings achieved through proper stud sizing and insulation placement.

Moisture-resistant drywall installation demands careful framing around plumbing and HVAC penetrations. You receive precise measurements and cutting to minimize gaps that could compromise your wall system's integrity.

Drywall Contractors Serving Burnaby, BC

Professional drywall services require licensed contractors familiar with local building requirements. Metrotown Drywall Burnaby maintains current certifications and insurance coverage for all residential and commercial projects.

Your project timeline depends on proper coordination between framing and drywall installation phases. Experienced contractors sequence work to avoid delays and ensure quality results throughout the construction process.

Service areas include:

• Metrotown district
• Brentwood neighborhoods
• Capitol Hill residences
• Central Park commercial zones

Building permit applications often require detailed framing plans and specifications. You receive documentation that meets Burnaby building department standards for plan review and inspection approvals.

Drywall Services for Renovation Projects

Renovation work presents unique challenges requiring adaptable drywall solutions. Your existing structure may need modifications to accommodate new electrical, plumbing, or HVAC systems before drywall installation begins.

Partial wall removal and reconstruction maintains structural integrity while creating open floor plans. You need careful planning to identify load-bearing elements and install appropriate support beams or columns.

Ceiling height modifications involve complex framing adjustments that affect your entire room's proportions. Professional assessment ensures proper load distribution and building code compliance.

Drywall patching and repair work often reveals underlying framing issues requiring immediate attention. Your renovation budget should account for potential structural upgrades discovered during wall removal or surface preparation phases.



Contact (604)-330-8736 to discuss your structural framing requirements and receive detailed project estimates.